There are many different quality iPhone screens in the market nowadays, most people know about OEM and Chinese copy screens, but is all OEM screens same quality? No, sure, they all have the original LCD, but what about other parts, like glass, frame and cable. So we roughly divide all the iPhone screens into 3 levels.
1. Your “ideal” iPhone screen, which is what we sell or refurbish for you, should consist of:
An original Apple LCD carefully pulled from an original Apple iPhone assembly in a clean and controlled refurbishment facility
Original quality Apple glass bonded to the original LCD
A cold press frame (desired method of bonding frame)
Cold press is the process of bonding the frame over time (15 seconds cooling time, 2-3 hours protecting time) to strongly bond the parts together
We are so confident with the frame, we offer the lifetime warranty for all the screen we sell or refurbish. If the glass or LCD drop out from frame, doesn’t matter if it’s before or after the installation, we will give you a new one, no question ask.
2. The second level of quality consists of:
Original Apple LCD
Cheap, copy glass & copy plastic, hot melt frame
Hot melt, the other alternative to bond the frame, is done much quicker and less carefully, with a 10 second cooling time and just a measly 6 second protecting time!
Remember: hot melt is a much less careful process and is similar to using hot glue. On a hot melt frame, heat and pressure from regular use of the iPhone can cause failure, especially on the iPhone 6 due to the frame having a smaller surface area than its predecessors.
3. The third level, and the absolute worst and cheapest parts on the market consist of:
Counterfeit LCD produced in a factory in China called “Tianma”
Copy glass that is not textured properly, resulting in frame not properly adhering
Hot melt frame
The texture on the back of the copy glass is actually very important. In these poorly assembled screens, the frame will not properly adhere to the screen, which will cause lifting issues later. This screen also breaks very easily, and may even break in a different manner than an original quality screen – chipping off, instead of shattering/cracking.
These counterfeit screens also are much more likely to completely black out when dropped, making your screen unusable. They’re also much more likely to lose touch when breaking.
Address:90 Esna Park Dr, unit 9, Markham,ON L3R 2R7
Tel: (905) 604-8831 (855)604-8831(toll free)
www.lcdtechinc.com
e-mail:support@lcdtechinc.com
